DMG-DMU100P duoBLOCK

SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS FOLLOWING, WE OFFER FOR YOUR CONSIDERATION:

One used 2004 DECKEL MAHO DMG-DMU100P duoBLOCK 5-Axis Machining Center:

Machine made in Pfronten, Germany, may be inspected under power in the US!

HEIDENHAIN iTNC 530 3-D control with 15″ TFT flat screen & handwheel

-WORKING RANGE-
X axis (longitudinal)…………………………… 39.4″ (1,000 mm)
Y axis (transverse)…………………………….. 39.4″ (1,000 mm)
Z axis (vertical)………………………………. 39.4″ (1,000 mm)

-MAXIMUM WORKPIECE DIMENSIONS-
Maximum workpiece diameter………………………. 49.2″ (1,250 mm)
Maximum workpiece height………………………… 62.2″ (1,580 mm)
Maximum workpiece weight…………………….. 4,409 lbs (2,000 kg)

-NC ROTARY TABLE 4TH AXIS (C-AXIS)-
Clamping surface… 43.3″ diameter x 35.4″ (1,100 mm diameter x 900 mm)
Maximum table load (centered)………………… 4,400 lbs (2,000 kg)
Maximum torque (40% ED)……………………. 3,614 ft/lb (4,900 Nm)
Maximum holding momentum (40% ED)…………… 3,614 ft/lb (4,900 Nm)
Rapid speed rotary axis (C-axis)………………………….. 30 rpm
1 x T-slot 18 H7 (alignment groove, table centre)
8 x T-slot 18 H12 (clamping grooves)
Distance between T-slots…………………………….. 4″ (100 mm)

-NC CONTROLLED 5TH AXIS (UNIVERSAL MILLING HEAD, B-AXIS)-
B axis – NC controlled range up to 190 degrees. From vertical position
0 degrees to the left -10 degrees (in direction of tool magazine) and to
the right to horizontal position +180 degrees=3D190 degrees in total.

-MAIN DRIVE-
Type……………………………………… AC controlled/digital
Power 40% duty cycle (S3)………………………….. 37 hp (28 kW)
Power 100% duty cycle (S1)…………………………. 25 hp (19 kW)
Spindle speed range……………………………….. 20-18,000 rpm
Acceleration/Deceleration……………………………. 2.2 seconds
Number of gear steps………………………………………. None
Maximum spindle torque 40% duty cycle………….. 89.2 ft/lb (121 Nm)
Maximum spindle torque 100% duty cycle…………. 60.48 ft/lb (82 Nm)
Spindle bearing diameter front……………………… 3.15″ (80 mm)
Spindle bearing diameter rear………………………. 2.36″ (60 mm)
Spindle taper…………………………………………… CAT 40
Tool clamping hydraulic/mechanical for draw bolt ISO/DIS 7388/II type B

-FEED DRIVES-
Type………………………………………. Brushless AC/Digital
Feed rate (x-y-z)…………………………… 2,362 ipm (60 m/min)
Rapid feed (x-y-z)………………………….. 2,362 ipm (60 m/min)
Acceleration (x-y-z)………………………………… 6/5/6 m/s-2
Feed power (x-y-z)………………………………….. 12/12/12 kN
Ball screw (x-y-z)………………………………… 40 mm x 20 mm

-60 POSITION TOOL CHANGER-
Magazine type…………………… Chain, horizontal, double gripper
Number of pockets…………………………………………… 60
Maximum tool weight……………………………… 33.1 lb (15 kg)
Maximum tool diameter with no neighbouring empty pockets 3.15″ (80 mm)
Maximum tool diameter with neighbouring empty pockets…. 6.3″ (160 mm)
Maximum tool length………………………………. 19.7″ (500 mm)

-HEIDENHAIN GLASS SCALES X/Y/Z AXES DIRECT PATH MEASURING SYSTEM-
Input Resolution………………………………………. 0.001 mm

-HEIDENHAIN ROTARY ENCODERS B/C AXES DIRECT PATH MEASURING SYSTEM-
Input Resolution………………………………………. 0.001 mm

-EXTERNAL FLOOD COOLANT PUMP-
Pump output external jets pressure……………… 21.7 PSI (1.5 bar)
Pump output external jets flow rate…… 10.6 gallon/minute (40 l/min)
Coolant tank capacity…………………………. 158 gallon (600 l)

-580 PSI COOLANT THRU THE SPINDLE CENTRE (FORM AD)-
Pump output…………………………. 6.1 gallon/minute (23 l/min)
Pump pressure………………………………….. 580 PSI (40 bar)

-EQUIPPED WITH-
Fully enclosed protection cabin

Production Package consisting of:
-Coolant tank 158 gallon (600 l)
-Automatic coolant cleaning through paper band filter
-580 PSI (40 bar) coolant thru the spindle centre (Form AD)
-Rotating clear-view window (in cabin window)
-Chip conveyor with interval control

HEIDENHAIN TS 641 infrared parts measuring probe

BLUM Laser tool measuring-tool length, diameter & broken tool detection
-Automatic retraction of the measuring unit in a protected housing.
-Tool length and diameter measuring in horizontal/vertical position.

Transformer
APPROXIMATE WEIGHT 37050#