GFMS-HPM450U

SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS FOLLOWING, WE OFFER FOR YOUR CONSIDERATION:

ONE USED 2013 MIKRON HPM 450U 5-AXIS AUTOMATED MACHINING CENTER:

Machine made in Nidau, Switzerland, inspect under power in the USA!

-CONTROL-
Heidenhain iTNC 530 with Ethernet and electronic handwheel for part setup

-WORKING RANGE-
Longitudinal X-Axis……………………………… 23.62″ (600 mm)
Transverse Y-Axis……………………………….. 17.72″ (450 mm)
Vertical Z-Axis…………………………………. 17.72″ (450 mm)

-ROTARY TILTING TORQUE MOTOR TABLE-
Tilt, B-Axis…………………………………… -120/+45 degrees
Rotary, C-Axis………………………………….. n x 360 degrees
Feed/Rapid Speed B-Axis………………………………….. 50 rpm
Feed/Rapid Speed C-Axis…………………………………. 140 rpm
Pallet Version System 3R Dynafix 280 mm x 280 mm (11.02″ x 11.02″) Pallets
Maximum Weight On Table 150 kg (331 lbs) manual; 90 kg (198 lbs) automatic
Automatic Pallet Changer……………… 7 Pallets (Dynafix) capacity
Max pallet size possible for this machine 350 mm x 350 mm (13.8″ x 13.8″)

-FEED DRIVES-
Feed Rate X/Y/Z………………………………. 590 IPM (15 m/min)
Rapid Speed X/Y/Z…………………………….. 866 IPM (22 m/min)

-STEPTEC SWISS MADE SPINDLE-
Spindle taper………………………………………….. HSK-A63
Spindle RPM…………………………………………. 20,000 RPM
Spindle power…………………………………… 40.2 HP (30 kW)
Spindle torque……………………………….. 67.1 Ft/Lb (91 Nm)

-60 POSITION TOOL CHANGER-
Automatic Tool Changer………………………………. 60 position

-EQUIPPED WITH-
Complete machine enclosure
Pallet changer Dynafix 280×280
Spindle chiller
Direct measuring system Heidenhain glass scales X/Y/Z, Encoders B,C
60 position tool changer
18-70 bar (261 PSI-1,015 PSI) Coolant Thru The Spindle
Paper band micro filter system 650 liter (172 gallon) capacity tank
BLUM laser tool measuring of tool length and diameter
M&H Infrared Parts Measuring Touch Probe
Lift-up Chip Conveyor
Spray Gun
Beacon
Blow-off unit for laser measuring system
All feed motors are liquid-cooled