One used 2004 DECKEL MAHO DMC70 eVolution 5-Axis Vertical Machining Center:

Machine made in Seebach, Germany

-Clamp once, machine 5-Sides-
Table on machine swivels 0-180 degrees and rotates 360 degrees which
allows for 5-Sided 5-Axis machining with one work piece clamping.

Heidenhain Millplus iT control with electronic handwheel for part setup

-WORKING AREA-
Traverse path X (longitudinal)…………………….. 29.5″ (750 mm)
Traverse path Y (traverse)………………………… 23.6″ (600 mm)
Traverse path Z (vertical)………………………… 20.5″ (520 mm)

-NC SWIVEL ROTARY WORKING TABLE-
B-Axis Swivel Range……………………………….. 0-180 degrees
C-Axis Rotation Range……………………………… 0-360 degrees
Rapid rate B-Axis Swivel…………………………………. 19 rpm
Rapid rate C-Axis Rotary…………………………………. 21 rpm

-AUTOMATIC PALLET CHANGER-
Clamping surface………………….. 19.6″ x 19.6″ (500 mm x 500 mm)
Optional pallet size possible, not included 24.8″ x 19.7″ (630 mm x 500mm)
Tapped Holes………………………………………………. M12
Maximum Load per Pallet…………………………. 551 lbs (250 kg)
Number of Pallets……………………………………………. 2
Pallet changing time…………………………………. 12 seconds
Maximum workpiece 24.724″ dia x 19.7″ high x 551 lbs(628mmdiax500mmx250kg)

-MAIN DRIVE-
Type of Drive………………………………. Brushless AC/Digital
Power 40% DC (S3)……………………………….. 46.9 hp (35 kW)
Power 100% DC (S1)………………………………. 33.5 hp (25 kW)
Spindle Speed Range……………………………….. 20-18,000 rpm
Spindle taper……………………………………………. HSK63
Number of gear steps………………………………………. None
Spindle Bearing Diameter, front (h/v)……………….. 3.14″ (80 mm)
Maximum Spindle Torque……………………… 95.88 ft lbs (130 Nm)

-FEED DRIVES-
Type of drive………………………………. Brushless AC/Digital
Rapid traverse linear axes X/Y/Z……………. 1,968.5 ipm (50 m/min)
Feed Range linear axes X/Y/Z…………………. 787.4 ipm (20 m/min)

-RATED ACCURACY TO VDI 3441-
Linear axes (X,Y,Z)
Pmax (X/Y/Z)………………………………….. 0.00032″ (8 um)
Psmax (X/Y/Z)………………………………….. 0.0002″ (5 um)

Circular axes (B,C)
Pmax (B/C axis)………………………………………. 10 arcs
Psmax (B/C axis)………………………………………. 5 arcs
Roundness, circ. mill. 150 mm diameter………….. 0.00064″ (16 um)

-TOOL MAGAZINE-
Storage pockets……………………………………. 32 positions
Maximum tool weight…………………………….. 13.22 lbs (6 kg)
Maximum tool diameter without vacant places………….. 3.15″ (80 mm)
Maximum tool diameter with vacant places……………. 4.13″ (105 mm)
Maximum tool length………………………………. 12.4″ (315 mm)
Chip to chip time………………………… Approximately 7 seconds

-FLOOD COOLANT-
Amount of coolant…………………………… 52.8 gallons (200 l)
Flow rate……………………….. 5.28 gallon/minute (20 l/minute)

-INTERNAL COOLANT SUPPLY THROUGH THE SPINDLE (CTS)-
Coolant Capacity………. 237.75 gallon (900 l), with paperband filter
Delivery rate/Pressure…….. 6.07 gal/min, 580 psi (23 l/min, 40 bar)

-MEASURING SYSTEM-
Direct, Heidenhain glass scales, resolution 0.00004″ for X/Y/Z
Heidenhain direct angle encoders for B & C Axes

-EQUIPPED WITH-
BLUM Laser tool measuring of tool length and diameter, also with broken
tool detection

HEIDENHAIN infrared parts measuring probe

Chip conveyor