Used 2005 DECKEL MAHO DMG-DMC64V 3-Axis Vertical Machining Center:

Machine made in Geretsried, Germany, inspect under power in Wisconsin!

HEIDENHAIN iTNC530 Control with Ethernet & Electronic Handwheel

-HIGHLIGHTS-
30 position pick-up tool changer which can be loaded during machining time

Tool changer is located behind working area to protect from emulsion &dirt

Direct measuring system (Heidenhain glass scales) for maximum accuracy

15″ TFT flat screen on HEIDENHAIN iTNC530 Control

-WORKING RANGE-
X axis………………………………………….. 25.2″ (640 mm)
Y axis………………………………………….. 23.6″ (600 mm)
Z axis………………………………………….. 19.7″ (500 mm)

-FEED-
Feed force X/Y/Z……………………………………….. 7,000 N
Feed rate……………………….. 0.04-1,575 ipm (1-40,000 mm/min)
Rapid traverse X/Y,Z……. 2,755 ipm (70 m/min) No ballscrew in X-Axis
Rapid traverse Y-Axis……………………….. 1,575 ipm (40 m/min)
Rapid traverse Z-Axis……………………….. 1,575 ipm (40 m/min)
Ball screw diameter/pitch (Y/Z)………………. 1.57/0.6″ (40/15 mm)

-ACCELERATION-
X-axis………………………………………………… 5 m/s-2
Y-axis………………………………………………… 4 m/s-2
Z-axis………………………………………………… 5 m/s-2

-POSITIONING ACCURACY (ADMISSIBLE VALUE ACCORDING TO VDI/DGQ 3441)
P: Y,Z-axis (direct measuring system) acc. VDI/DGQ 3441 0.0004″ (0.010 mm)
P: X-axis (direct measuring system) acc. VDI/DGQ 3441 0.0003″ (0.008 mm)

-HEIDENHAIN GLASS SCALES X/Y/Z PATH MEASURING SYSTEM (RESOLUTION)-
Direct……………………………………………….. 0.001 mm

-MAIN SPINDLE-
Speed range……………………………………….. 1-12,000 rpm
Drive power 40% DC/continous duty………….. 25.5/17.4 hp (19/13 kW)
Torque 40% DC/continous duty……………. 73/51.1 ft/lbs (100/70 Nm)
Tool mounting DIN 69 871-A……………………………….. CAT 40
Tool clamping force…………………………………….. 8,000 N
Tool releasing force…………………………………… 13,000 N
Acceleration 0-12,000 rpm……………………………. 2.3 seconds
Deceleration 12,000 rpm-0……………………………. 1.4 seconds

-PICK-UP TOOL MAGAZINE/CHANGER-
Number of tools…………………………………………….. 30
Maximum tool diameter……………………………… 3.9″ (100 mm)
Maximum tool diameter, vacant adjacent places………… 5.5″ (140 mm)
Maximum tool length………………………………. 11.8″ (300 mm)
Maximum tool weight……………………………… 15.4 lbs (7 kg)
Maximum loading weight of tool magazine……………. 198 lbs (90 kg)
Chip to chip time………………………… Approximately 7 seconds

-TABLE DESIGN-
Clamping area with T-slots DIN 650-14.. 33.5″ x 23.6″ (850 mm x 600 mm)
Loading height (upper edge of table)……………….. 33.5″ (850 mm)
Maximum work load capacity…………………….. 1,320 lbs (600 kg)

-EQUIPPED WITH-
HEIDENHAIN iTNC530 CNC Control with 15″ TFT flat screen monitor

Spray gun

Fully enclosed work cabin

Machine will come with a miscellaneous assortment of CAT 40 tool holders

Price quoted in US Dollars

APPROXIMATE WEIGHT 17637#