DMG-DMU 50 eVolution

SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS FOLLOWING, WE OFFER FOR YOUR CONSIDERATION:

Used 2001 DECKEL MAHO DMG-DMU 50 eVolution 5Axis Simultaneous VMC:

Machine made in Seebach, Germany

-Clamp once, machine 5-Sides-
Table on machine swivels 0-180 degrees and rotates 360 degrees which
allows for 5-Axis simultaneous machining with one work piece clamping.

HEIDENHAIN Millplus CNC control with electronic handwheel

-WORK AREA-
Traverse path X (longitudinal)…………………….. 19.7″ (500 mm)
Traverse path Y (across)………………………….. 16.5″ (420 mm)
Traverse path Z (vertical)………………………….. 15″ (380 mm)

-MAIN DRIVE-
AC-motor spindle drive power 100% DC………………. 33.5 HP (25 kW)
AC-motor spindle drive power 40% DC……………….. 46.9 HP (35 kW)
Spindle speed…………………………………….. 20-18,000 rpm
Spindle taper…………………………………………… CAT 40
Number of gear steps………………………………………. None
Max Spindle Torque………………………….. 95.9 Ft/Lbs (130 Nm)
Spindle Bearing Diameter…………………………… 3.15″ (80 mm)

-FEED DRIVES-
Rapid traverse linear axes X/Y/Z……………. 1,968.5 ipm (50 m/min)
Feed Range linear axes X/Y/Z…………………. 787.4 ipm (20 m/min)

-TOOL MAGAZINE-
Storage pockets……………………………………. 60 positions
Maximum tool weight…………………………….. 13.22 lbs (6 kg)
Maximum tool diameter without vacant places………….. 3.15″ (80 mm)
Maximum tool diameter with vacant places……………. 4.13″ (105 mm)
Maximum tool length……………………………… 11.02″ (280 mm)
Chip to chip time………………………… Approximately 6 seconds

-FLOOD COOLANT-
Amount of coolant…………………………… 52.8 gallons (200 l)
Flow rate……………………….. 5.28 gallon/minute (20 l/minute)

-MEASURING SYSTEM-
Direct, Heidenhain glass scales, resolution 0.00004″ for X/Y/Z
Heidenhain direct angle encoders for B & C Axes

-NC SWIVEL ROTARY TABLE-
Clamping surface…………………….. 19.7″ x 15.0″ (500 x 380 mm)
Swivel range 5th (swivel) B-axis……………………. 0-180 degrees
Rotation range 4th (rotary) C-axis 0-360 degrees (continous, full 4th)
Rapid traverse, (swivel) B-axis…………………………… 26 rpm
Rapid traverse, (rotary) C-axis…………………………… 33 rpm
Maximum table load……………………………… 441 lbs (200 kg)
Table measuring system……. Direct path measuring system in both axes
Table cooling……. Drive cooling for B and C axis with heat exchanger
Table swivel time, horizontal/vertical……. Approximately 1.5 seconds

-EQUIPPED WITH-
BLUM laser tool measuring of tool length, diameter,& broken tool detection

PRODUCTION PACKAGE consisting of:
580 PSI (40 Bar) Coolant Thru the Spindle

Chip Conveyor

Visiport inspection window on front door of machine

Electric oil mist extractor

RENISHAW MP10 infrared parts measuring probe

Buy this machine for as low as $1,753.00 per month for 48 months with
$1.00 Purchase Option!*
*Subject to credit review and approval.

Vise shown in photos does not come with the machine

Price quoted in US Dollars, Purchase Point is Hartland, WI 53029